Otu nkwụsị eletrọnịkị PCBA bọọdụ emeputa

Ọrụ anyị:

Site na mmepe nke nnukwu data, igwe ojii na nkwurịta okwu 5G, enwere ike dị ukwuu na ụlọ ọrụ ihe nkesa / nchekwa. A na-egosipụta ihe nkesa ndị ahụ na ikike mgbako CPU dị elu, ọrụ a pụrụ ịdabere na ya ogologo oge, ike njikwa data mpụga nke I/O na mma extensibility. Teknụzụ Suntak na-agba mbọ ịnye bọọdụ ọsọ ọsọ na bọọdụ dị elu nke nwere ntụkwasị obi dị elu, nkwụsi ike dị elu na ikike nnabata dị elu achọrọ maka ogo nkesa.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Njirimara ngwaahịa

● Ihe: Fr-4

● Ngụkọta oyi akwa: 6 n'ígwé

● PCB ọkpụrụkpụ: 1.2mm

● Min. Chọpụta / Oghere Mpụ: 0.102mm/0.1mm

● Min. Oghere mkpọ: 0.1mm

● Site na Usoro: Vias ụlọikwuu

● Mmecha elu: ENIG

PCB Ọdịdị njirimara

1. Circuit na ụkpụrụ (Ụkpụrụ): A na-eji sekit dị ka ngwá ọrụ maka iduzi n'etiti components. N'ime imewe ahụ, a ga-emepụta nnukwu ọla kọpa dị ka ihe ntanetị na ike inye ọkụ. A na-eme ahịrị na eserese n'otu oge.

2. Oghere (Throughole / via): The site oghere nwere ike ime ka ahịrị nke ihe karịrị ọkwa abụọ na-eduzi ibe ha, nke ka ukwuu site na oghere na-eji dị ka ihe nkwụnye ihe, na-adịghị eduzi oghere (nPTH) na-ejikarị eme ihe. dị ka n'elu Ịkwado na n'ọkwa, eji maka idozi kposara n'oge mgbakọ.

3. Solderresistant ink (Solderresistant/SolderMask): Ọ bụghị ihe niile ọla kọpa na-ebupụta ga-eri tin akụkụ, ya mere, ndị na-abụghị tin-eri ebe a ga-ebipụta na oyi akwa nke ihe onwunwe (na-emekarị epoxy resin) na-ekewapụ ọla kọpa elu si eri tin ka. zere ndị na-abụghị soldering. Enwere obere sekit n'etiti ahịrị tinned. Dị ka usoro dị iche iche si dị, a na-ekewa ya na mmanụ na-acha akwụkwọ ndụ akwụkwọ ndụ, mmanụ uhie na mmanụ na-acha anụnụ anụnụ.

4. Dielectric oyi akwa (Dielectric): A na-eji ya na-ejigide ihe mkpuchi n'etiti ahịrị na n'ígwé, nke a na-akpọkarị substrate.

arụ ọrụ

PCBA oru ike

SMT Izi ezi ọnọdụ:20 um
Akụkụ akụkụ: 0.4 × 0.2mm (01005) -130 × 79mm, Flip-CHIP, QFP, BGA, POP
Oke. akụkụ elu :: 25mm
Oke. PCB nha: 680×500mm
Min. PCB size: enweghị oke
PCB ọkpụrụkpụ: 0.3 ka 6mm
PCB arọ: 3KG
Wave-Solder Oke. PCB obosara: 450mm
Min. PCB obosara: enweghị oke
Akụkụ akụkụ elu: elu 120mm/Bot 15mm
Ọsụsọ-Slder Ụdị ígwè: akụkụ, dum, inlay, sidestep
Ihe igwe: ọla kọpa, Aluminom
Imecha elu elu: plating Au, plating sliver, plating Sn
Ọnụọgụ eriri afọ ikuku: ihe na-erughị 20%
Pịa-dabara Oke pịa: 0-50KN
Oke. PCB nha: 800X600mm
Nnwale ICT, Nyocha na-efe efe, ọkụ ọkụ, ule ọrụ, ịgba ígwè okpomọkụ

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya